轴承的产品表中所列的可达到的速度是标准值，并在下列条件下有效_新闻动态_hrb轴承,哈尔滨轴承批发,深沟球轴承,滚子轴承型号-保定经销商

新闻动态

当前位置：网站首页 > 新闻动态 > 详细信息

轴承的产品表中所列的可达到的速度是标准值，并在下列条件下有效

添加时间：2018/3/15 17:01:28 浏览次数：

轴承的产品表中所列的可达到的速度是标准值，并在下列条件下有效
The achievable speed in the bearing table is a standard value and is valid under the following conditions.
-轻载轴承性（P≤0.05C）
Light load - bearing resistance (P = 0.05C)
-良好的散热，远离轴承
- good heat dissipation, away from the bearing
-轻型弹簧预紧力时，角接触球轴承已纳入
- the angular contact ball bearing has been included in the light spring pretightening force
-适当润滑轴承。
- properly lubricate the bearing.
轴承的最高速度：
The highest speed of the bearing:
在油润滑产品表中列出的值可以被认为是最长的值。只有油喷射润滑可以实现更高的速度。在这种情况下，原油类型，供应和排水速度，进油温度等应予以考虑。
The value listed in the oil lubricated product table can be considered the longest. Only oil jet lubrication can achieve higher speed. In this case, the type of crude oil, the speed of supply and drainage, and the temperature of the oil intake should be considered.
轴承的加速其他油润滑方法：
Bearing acceleration other oil lubrication methods:
对油气润滑的可达到的速度可以用来估计其他油润滑方法可达到的速度。对于油浴润滑，减少了0,30,4因素应予以考虑。对于油雾润滑，减少了0,95因素是足够的。
The achievable speed of oil and gas lubrication can be used to estimate the speed that other oil lubrication methods can reach. For oil bath lubrication, the reduction of 0,30,4 factors should be taken into consideration. For oil mist lubrication, the reduction of the 0,95 factor is sufficient.

上一页滚动轴承的构成及其材料的热处理

下一页润滑不足导致的损坏阶段