保定轴承经销商-hrb轴承,哈尔滨轴承经销商

一、内套圈压入一定要做好相关的单配定位罩和轴承端面的间隙。

First, the inner ring pressing must do the relevant single matching cover and bearing end clearance.

二、在安装的时候最好用压入安装，这样才能让轴承更好地运转。

Two, in the installation of the best use press into the installation, so as to make the bearings better operation.

三、外圈在压入时一定要注意不要造成轴承表面损伤。

Three, the outer ring in the press must pay attention to do not cause damage to the bearing surface.